| SCREW SIZE | WCL PRODUCT NUMBER | A | B | C | D | E | G | H | I | PANEL THICKNESS RANGE | PANEL HOLE DIAMETER MINIMUM | HOLE CENTER TO EDGE | UPPER LEG LENGTH | WIDTH | METAL THICKNESS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6-32 | UN-630140-1 | • | • | • | .050-.062 | 11/64 | 5/32 | 3/8 | 5/16 | 0.018 | |||||
| 6-32 | UN-630151-1 | • | • | .110-.125 | 7/32 | 3/16 | 27/64 | 21/64 | 0.018 | ||||||
| 6-32 | UN-630190-1 | • | • | • | .220-.250 | 11/64 | 11/64 | 3/8 | 5/16 | 0.015 | |||||
| 6-32 | UN-630530-13,5 | • | • | • | .281-MAX | 5/32 | 9/32 | 29/64 | 11/32 | 0.018 | |||||
| 6A,B | UN-630510-11 | • | • | .015-.031 | 3/16 | 3/16 | 3/8 | 5/16 | 0.018 | ||||||
| 6A,B | UN-630525-13 | • | • | .062-.080 | 11/64 | 3/16 | 15/32 | 5/16 | 0.02 | ||||||
| 6A,B | UN-637348-17 | • | • | • | .051-.064 | 17/64 | 3/16 | 15/32 | 1/2 | 0.025 | |||||
| 6A,B | UN-630700-13 | • | • | .107-.113 | 7/32 | 13/64 | 25/64 | 21/64 | 0.025 | ||||||
| 6A,B | UN-630710-13,7 | • | • | • | .107-.113 | 7/32 | 13/64 | 13/32 | 21/64 | 0.025 | |||||
| 6A,B | UN-630725-1 | • | • | .062-.072 | 7/32 | 15/64 | 7/16 | 5/16 | 0.025 | ||||||
| 6A,B | UN-630705-13 | • | • | .090-.100 | 7/32 | 15/64 | 27/64 | 5/16 | 0.025 | ||||||
| 6A,B | UN-630540-1 | • | .105-.125 | 7/32 | 13/64 | 27/64 | 5/16 | 0.025 | |||||||
| 6A,B | UN-630505-1 | • | • | .072-.092 | 17/64 | 1/4 | 17/32 | 1/2 | 0.025 | ||||||
| 6A,B | UN-630242-13 | • | • | • | .135-.150 | 3/16 | 17/64 | 17/32 | 5/16 | 0.025 | |||||
| 6A,B | WN-637361-12 | • | • | .025-.150 | 9/32 | 17/64 | 21/32 | 5/8 | 0.025 | ||||||
| 6A,B | WN-637362-12 | • | • | .090-.115 | 3/16 | 17/64 | 21/32 | 5/8 | 0.025 | ||||||
| 6A,B | WN-637360-12 | • | • | .025-.150 | 3/16 | 17/64 | 49/64 | 35/64 | 0.025 | ||||||
| 6A,B | UN-630541-1 | • | • | .105-.125 | 7/32 | 13/64 | 27/64 | 5/16 | 0.02 | ||||||
| 6A,B | UN-630255-13 | • | • | .185-.195 | 5/32 | 9/32 | 19/32 | 5/16 | 0.02 | ||||||
| 6A,B | UN-630675-1 | • | .040-.093 | 1/4 | 5/16 | 5/8 | 7/16 | 0.02 | |||||||
| 6A,B | UN-630275-1 | • | .062-.093 | 1/4 | 5/16 | 41/64 | 7/16 | 0.02 | |||||||
| 6A,B | UN-630605-1 | • | .025-.064 | 17/64 | 1/2 | 27/32 | 7/16 | 0.025 | |||||||
| 6A,B | UN-630690-1 | • | • | • | .135-.150 | 11/64 | 11/64 | 3/8 | 5/16 | 0.018 | |||||
| 8-32 | UN-631025-1 | • | • | • | .088-.098 | 7/32 | 11/64 | 27/64 | 13/32 | 0.018 | |||||
| 8-32 | UN-631004-1 | • | • | .075-.090 | 3/16 | 3/16 | 23/64 | 5/16 | 0.018 | ||||||
| 8-32 | UN-630990-1 | • | • | • | .187-.250 | 3/16 | 17/64 | 31/64 | 5/16 | 0.018 | |||||
| 8-32 | UN-630996-13 | • | • | .086-096 | 3/16 | 13/64 | 1/2 | 7/16 | 0.018 | ||||||
| 8A,B | UN-631353-1 | • | • | .035-.050 | 1/4 | 5/32 | 29/64 | 7/16 | 0.028 | ||||||
| 8A,B | UN-632005-11,4 | • | • | • | .030-.040 | 3/16 | 5/32 | 11/32 | 5/16 | 0.025 | |||||
| 8A,B | UN-632030-11,3 | • | • | • | • | .070-.100 | 3/16 | 5/32 | 3/8 | 7/16 | 0.02 | ||||
| 8A,B | UN-632000-11 | • | .015-.030 | 7/32 | 3/16 | 25/64 | 5/16 | 0.025 | |||||||
| 8A,B | UN-632012-1 | • | • | .060-.090 | 17/64 | 3/16 | 7/16 | 9/16 | 0.02 | ||||||
| 8A,B | UN-631070-14 | • | • | • | • | • | .060-.100 | 7/32 | 13/64 | 15/32 | 11/32 | 0.02 | |||
| 8A,B | UN-631450-1 | • | • | .040-.055 | 1/4 | 7/32 | 1/2 | 7/16 | 0.025 | ||||||
| 8A,B | UN-631988-13,7 | • | • | .080-.090 | 3/16 | 7/32 | 17/32 | 13/32 | 0.028 | ||||||
| 8A,B | UN-631982-1 | • | • | .025-.040 | 9/32 | 15/64 | 9/16 | 13/32 | 0.025 | ||||||
| 8A,B | UN-632024-1 | • | .020-.030 | 7/32 | 1/4 | 15/32 | 7/16 | 0.02 | |||||||
| 8A,B | UN-632050-1 | • | • | .020-.035 | 1/4 | 1/4 | 1/2 | 7/16 | 0.025 | ||||||
| 8A,B | UN-632391-13 | • | • | .040-.062 | 7/32 | 1/4 | 37/64 | 7/16 | 0.025 | ||||||
| 8A,B | UN-637815-13,7 | • | • | .108-.197 | 1/4 | 17/64 | 5/8 | 7/16 | 0.02 | ||||||
| 8A,B | WN-637829-12 | • | • | .025-.150 | 9/32 | 17/64 | 21/32 | 5/8 | 0.025 | ||||||
| 8A,B | WN-637831-12 | • | • | • | .025-.150 | 3/16 | 17/64 | 21/32 | 5/8 | 0.025 | |||||
| 8A,B | WN-637826-12 | • | • | • | .080-.150 | 9/32 | 17/64 | 47/64 | 17/32 | 0.028 | |||||
| 8A,B | WN-637827-13 | • | • | .025-.150 | 7/32 | 17/64 | 49/64 | 35/64 | 0.028 | ||||||
| 8A,B | UN-631102-1 1,3 | • | • | • | .110-.115 | 3/16 | 19/64 | 15/32 | 7/16 | 0.025 | |||||
| 8A,B | UN-631101-1 1,3 | • | • | • | • | .110-.115 | 3/16 | 9/32 | 15/32 | 7/16 | 0.025 | ||||
| 8A,B | UN-633212-1 3,5 | • | • | • | • | .080-.102 | 1/4 | 9/32 | 17/32 | 7/16 | 0.02 | ||||
| 8A,B | UN-637830-11,3,7 | • | • | • | .021-.066 | 7/32 | 9/32 | 9/16 | 1/2 | 0.025 | |||||
| 8A,B | UN-637825-1 1,7 | • | • | • | .027-.066 | 7/32 | 9/32 | 9/16 | 1/2 | 0.025 | |||||
| 8A,B | UN-631350-1 | • | .024-.055 | 5/16 | 9/32 | 19/32 | 7/16 | 0.02 | |||||||
| 8A,B | UN-631351-1 | • | .025-.055 | 5/16 | 9/32 | 19/32 | 7/16 | 0.02 | |||||||
| 8A,B | UN-631357-1 3 | • | • | .025-.075 | 1/4 | 9/32 | 5/8 | 7/16 | 0.02 | ||||||
| 8A,B | UN-631358-1 3 | • | • | .025-.075 | 1/4 | 9/32 | 21/32 | 7/16 | 0.02 | ||||||
| 8A,B | UN-631352-1 | • | • | .025-.040 | 7/32 | 19/64 | 5/8 | 7/16 | 0.028 | ||||||
| 8A,B | UN-632389-1 | • | .085-.110 | 9/32 | 19/32 | 41/64 | 3/8 | 0.025 | |||||||
| 8A,B | WN-637821-1 2,3 | • | • | • | .125-.250 | 7/32 | 19/64 | 45/64 | 17/32 | 0.025 | |||||
| 8A,B | WN-637824-1 3,7 | • | • | • | • | • | .025-.150 | 7/32 | 19/64 | 45/64 | 17/32 | 0.025 | |||
| 8A,B | WN-637818-1 2,3 | • | • | • | .025-.150 | 7/32 | 19/64 | 23/32 | 17/32 | 0.025 | |||||
| 8A,B | WN-637819-1 2,3 | • | • | • | .025-.150 | 7/32 | 19/64 | 23/32 | 17/32 | 0.025 | |||||
| 8A,B | UN-632395-1 | • | .040-.093 | 1/4 | 5/16 | 39/64 | 7/16 | 0.025 | |||||||
| 8A,B | UN-637810-1 3 | • | • | .100-.145 | 1/4 | 5/16 | 5/8 | 7/16 | 0.025 | ||||||
| 8A,B | UN-631700-1 3,4 | • | .040-.120 | 1/4 | 5/16 | 41/64 | 3/8 | 0.018 | |||||||
| 8A,B | UN-631709-1 3 | • | .100-.120 | 1/4 | 5/16 | 41/64 | 3/8 | 0.02 | |||||||
| 8A,B | UN-632392-1 | • | • | • | • | • | .020-.040 | 7/32 | 21/64 | 39/64 | 3/8 | 0.03 | |||
| 8A,B | UN-632011-1 | • | • | • | • | .085-.095 | 11/64 | 21/64 | 41/64 | 5/8 | 0.025 | ||||
| 8A,B | UN-632393-1 | • | .085-.095 | 1/4 | 21/64 | 3/4 | 7/16 | 0.025 | |||||||
| 8A,B | UN-631356-1 | • | .045-.062 | 9/32 | 11/32 | 21/32 | 7/16 | 0.02 | |||||||
| 8A,B | UN-631989-1 3,7 | • | • | .025-.080 | 7/32 | 23/64 | 11/16 | 13/32 | 0.028 | ||||||
| 8A,B | UN-632396-1 5 | • | • | • | • | .070-.120 | 7/32 | 23/64 | 45/64 | 5/8 | 0.025 | ||||
| 8A,B | UN-632403-1 7 | • | .060-.080 | 5/16 | 3/8 | 47/64 | 3/4 | 0.028 | |||||||
| 8A,B | UN-631973-1 3 | • | • | • | .080-.105 | 7/32 | 25/64 | 11/16 | 5/8 | 0.025 | |||||
| 8A,B | UN-631631-1 | • | • | .035-.060 | 1/4 | 13/32 | 23/32 | 5/8 | 0.02 | ||||||
| 8A,B | UN-632394-1 3,7 | • | • | • | .070-.090 | 1/4 | 7/16 | 45/64 | 7/16 | 0.02 | |||||
| 8A,B | UN-631105-1 | • | • | .030-.050 | 7/32 | 7/16 | 49/64 | 7/16 | 0.02 | ||||||
| 8A,B | UN-632010-1 | • | • | .024-.055 | 1/4 | 33/64 | 29/32 | 5/8 | 0.02 | ||||||
| 8A,B | WN-637828-1 2,3 | • | • | .025-.150 | 7/32 | 1/2 | 63/64 | 17/32 | 0.025 | ||||||
| 8A,B | UN-632400-1 | • | • | .120-.140 | 17/64 | 17/32 | 29/32 | 5/8 | 0.028 | ||||||
| 8A,B | UN-637862-1 7 | • | • | • | • | • | • | .170-.200 | 1/4 | 5/8 | 23399 | 1/2 | 0.03 | ||
| 10-24 | UN-632615-1 3 | • | • | • | .085-.100 | 7/32 | 15/64 | 9/16 | 5/8 | 0.022 | |||||
| 10-24 | UN-632623-1 | • | • | • | .040-.060 | 1/4 | 17/64 | 9/16 | 5/8 | 0.022 | |||||
| 10-24 | UN-632545-1 3 | • | .100-.120 | 9/32 | 17/64 | 5/8 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632446-1 | • | • | .024-.055 | 5/16 | 5/16 | 5/8 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632575-1 3 | • | • | .032-.062 | 5/16 | 11/32 | 5/8 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632751-1 | • | .093-.125 | 9/32 | 7/16 | 13/16 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632755-1 3 | • | • | .100-.125 | 9/32 | 29/64 | 7/8 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632627-1 6 | • | .040-.062 | 5/16 | 1/2 | 27/32 | 7/16 | 0.02 | |||||||
| 10-32 | UN-632899-1 | • | • | .024-.055 | 9/32 | 5/16 | 39/64 | 7/16 | 0.02 | ||||||
| 10-32 | UN-632897-1 | • | • | • | .030-.040 | 9/32 | 5/16 | 39/64 | 7/16 | 0.02 | |||||
| 10-32 | UN-632898-1 3 | • | • | .102-.025 | 9/32 | 25/64 | 25/32 | 7/16 | 0.02 | ||||||
| 10-32 | UN-632910-1 | • | • | .020-.030 | 11/32 | 13/32 | 49/64 | 7/16 | 0.02 | ||||||
| 10-32 | UN-632900-1 | • | • | .020-.040 | 9/32 | 7/16 | 49/64 | 7/16 | 0.02 | ||||||
| 10-32 | UN-632935-1 3 | • | • | .020-.080 | 9/32 | 7/16 | 25/32 | 7/16 | 0.02 | ||||||
| 10A | UN-633205-1 | • | .024-.055 | 5/16 | 9/32 | 19/32 | 7/16 | 0.02 | |||||||
| 10A | UN-633204-1 3 | • | • | .081-.105 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10A | UN-633420-1 3 | • | .080-.110 | 9/32 | 19/64 | 11/16 | 7/16 | 0.02 | |||||||
| 10A | UN-633202-1 | • | • | .025-.040 | 5/16 | 5/16 | 45/64 | 1/2 | 0.025 | ||||||
| 10A | UN-633449-1 | • | • | .020-.060 | 1/4 | 11/32 | 11/16 | 1/2 | 0.028 | ||||||
| 10A | UN-633450-1 7 | • | • | • | • | • | .020-.060 | 1/4 | 11/32 | 11/16 | 1/2 | 0.028 | |||
| 10A | UN-633440-1 6 | • | .093-.109 | 19/64 | 3/8 | 11/16 | 7/16 | 0.025 | |||||||
| 10A | UN-633226-1 7 | • | • | • | .030-.050 | 1/4 | 13/32 | 11/16 | 7/16 | 0.028 | |||||
| 10A | UN-633175-1 | • | • | .060-.075 | 1/4 | 13/32 | 47/64 | 7/16 | 0.03 | ||||||
| 10A | UN-633470-1 | • | • | • | .099-.109 | 9/32 | 13/32 | 11/16 | 5/8 | 0.025 | |||||
| 10A | UN-633280-1 | • | .078-.094 | 9/32 | 1/2 | 31/32 | 1/2 | 0.03 | |||||||
| 10A | WN-637856-1 2 | • | • | • | .025-.150 | 9/32 | 17/64 | 41/64 | 5/8 | 0.03 | |||||
| 10A | UN-637835-1 3,7 | • | .230-.270 | 9/32 | 9/32 | 9/16 | 1/2 | 0.03 | |||||||
| 10A,B | UN-633812-1 | • | • | .050-.070 | 1/4 | 5/16 | 11/16 | 1/2 | 0.03 | ||||||
| 10A,B | UN-637832-1 | • | • | • | .031-.039 | 5/16 | 11/32 | 41/64 | 1/2 | 0.03 | |||||
| 10B | WN-637855-1 2 | • | • | • | .025-.150 | 9/32 | 17/64 | 11/16 | 5/8 | 0.03 | |||||
| 10B | WN-637874-1 2 | • | • | .025-.150 | 9/32 | 17/64 | 49/64 | 17/32 | 0.03 | ||||||
| 10B | UN-634765-1 | • | • | .109-.125 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10B | UN-634760-1 | • | • | .109-.125 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10B | UN-633902-1 | • | • | .050-.065 | 7/32 | 5/16 | 21/32 | 1/2 | 0.03 | ||||||
| 10B | UN-633811-1 3 | • | • | .140-.160 | 1/4 | 21/64 | 19/32 | 5/8 | 0.03 | ||||||
| 10B | UN-633430-1 | • | .070-.100 | 7/32 | 11/32 | 43/64 | 7/16 | 0.02 | |||||||
| 10B | UN-633825-1 | • | • | .035-.075 | 5/16 | 11/32 | 47/64 | 1/2 | 0.03 | ||||||
| 10B | UN-634770-1 | • | • | .085-.130 | 7/32 | 11/32 | 43/64 | 7/16 | 0.02 | ||||||
| 10B | UN-633830-1 3,7 | • | • | • | • | • | • | .036-.056 | 7/32 | 11/32 | 3/4 | 7/16 | 0.025 | ||
| 10B | UN-634730-1 3 | • | • | .030-.100 | 9/32 | 3/8 | 43/64 | 1/2 | 0.03 | ||||||
| 10B | WN-634780-1 2 | • | • | .025-.150 | 9/32 | 3/8 | 13/16 | 5/8 | 0.028 | ||||||
| 10B | UN-633832-1 | • | • | • | • | .056-.083 | 1/4 | 13/32 | 3/4 | 1/2 | 0.03 | ||||
| 10B | WN-637840-1 2 | • | • | .025-.150 | 9/32 | 17/32 | 1 | 17/32 | 0.028 | ||||||
| 10B | UN-634700-1 | • | .078-.094 | 9/32 | 9/16 | 1 | 1/2 | 0.02 | |||||||
| 10B | UN-633810-1 3,7 | • | • | • | • | .055-.075 | 9/32 | 5/8 | 1 | 7/16 | 0.03 | ||||
| 10B | UN-633800-1 | • | • | .025-.040 | 5/16 | 41/16 | 11689 | 1/2 | 0.025 | ||||||
| 10B | UN-634720-1 | • | • | • | .070-.100 | 7/32 | 21/32 | 1 | 9/16 | 0.03 | |||||
| 10B | UN-634005-1 7 | • | • | • | .032-.046 | 9/32 | 7/8 | 23387 | 7/16 | 0.03 | |||||
| 7309 | UN-635679-1 | • | • | • | • | .065-.075 | 17/64 | 7/32 | 5/8 | 3/4 | 0.025 | ||||
| 7309 | UN-635680-1 | • | • | .050-.075 | 5/16 | 9/32 | 3/4 | 1/2 | 0.025 | ||||||
| 14A | UN-635500-1 | • | • | .028-.056 | 5/16 | 3/8 | 55/64 | 9/16 | 0.035 | ||||||
| 14A | UN-635543-1 | • | • | .028-.087 | 5/16 | 3/8 | 15/16 | 9/16 | 0.035 | ||||||
| 14A | UN-635544-1 | • | • | .028-.087 | 5/16 | 3/8 | 15/16 | 9/16 | 0.035 | ||||||
| 1/4B | WN-637853-1 2 | • | • | • | .025-.150 | 9/32 | 17/64 | 5/8 | 5/8 | 0.035 | |||||
| 1/4B | WN-635575-1 2 | • | • | • | • | • | .035-.150 | 9/32 | 17/64 | 5/8 | 5/8 | 0.035 | |||
| 1/4B | WN-637854-1 2 | • | • | • | .025-.150 | 9/32 | 5/16 | 45/64 | 5/8 | 0.035 | |||||
| 1/4B | UN-635005-1 3,4 | • | • | • | .095-.125 | 17/64 | 5/16 | 13/16 | 1/2 | 0.04 | |||||
| 1/4B | UN-635554-1 | • | • | .020-.050 | 13/32 | 15/32 | 15/16 | 9/16 | 0.03 | ||||||
| 1/4B | UN-635555-1 | • | • | .020-.050 | 13/32 | 15/32 | 15/16 | 9/16 | 0.03 | ||||||
| 6711 | UN-637917-1 | • | .060-.070 | 3/8 | 1/2 | 15/16 | 5/8 | 0.025 | |||||||
| 5/16-10 ACME | UN-637998-1 | • | • | .030-.060 | 7/16 | 9/16 | 23381 | 5/8 | 0.04 |
Notes: 1. Turned up corner(s) on top leg, 2. Wide range panel., 3. Square fold., 4. Prevailing torque., 5. Up-turned barb on lower leg., 6. Full extrusion lower leg., 7. Special; request blueprint.
| SCREW SIZE | WCL PRODUCT NUMBER |
A | B | C | D | E | F | G | PANEL THICKNESS RANGE |
PANEL HOLE DIAMETER MINIMUM |
HOLE CENTER TO EDGE |
UPPER LEG LENGTH |
WIDTH | METAL THICKNESS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4B | UN-630050-1 | • | .025-.032 | 5/32 | 3/16 | 3/8 | 5/16 | 0.02 | ||||||
| 6-32 | UN-630105-1 | • | • | • | .035-.040 | 5/32 | 5/32 | 3/8 | 5/16 | 0.018 | ||||
| 6-32 | UN-630110-1 | • | • | .040-.051 | 9/32 | 5/32 | 23/64 | 5/16 | 0.018 | |||||
| 6-32 | UN-630165-1 | • | • | • | .035-.040 | 5/32 | 5/32 | 3/8 | 5/16 | 0.018 | ||||
| 6-32 | UN-630114-1 | • | • | • | • | .110-.125 | 5/32 | 11/64 | 23/64 | 1/2 | 0.018 | |||
| 6-32 | UN-630120-1 | • | • | .110-.125 | 5/32 | 11/64 | 23/64 | 1/2 | 0.018 | |||||
| 6-32 | UN-637165-1 1,7 | • | .032-.060 | 3/16 | 11/64 | 3/8 | 5/16 | 0.018 | ||||||
| 6-32 | UN-630125-1 | • | • | • | .015-.025 | 3/16 | 3/16 | 3/8 | 5/16 | 0.018 | ||||
| 6-32 | UN-637055-1 | • | • | • | .072-.081 | 17/64 | 3/16 | 7/16 | 1/2 | 0.018 | ||||
| 6-32 | UN-637220-1 | • | • | • | .140-.156 | 5/32 | 3/16 | 27/64 | 9/32 | 0.018 | ||||
| 6-32 | UN-637215-1 | • | • | .140-.150 | 3/16 | 3/16 | 27/64 | 9/32 | 0.018 | |||||
| 6-32 | UN-630172-1 | • | • | • | .025-.040 | 3/16 | 7/32 | 31/64 | 1/2 | 0.018 | ||||
| 6-32 | UN-630150-1 | • | • | .025-.040 | 1/4 | 7/32 | 1/2 | 1/2 | 0.018 | |||||
| 6-32 | UN-630171-1 | • | • | • | .045-.062 | 3/16 | 7/32 | 31/64 | 1/2 | 0.018 | ||||
| 6-32 | UN-630144-1 | • | • | .110-.130 | 3/16 | 1/4 | 17/32 | 5/16 | 0.018 | |||||
| 6-32 | UN-630146-1 3,6 | • | .110-.130 | 3/16 | 1/4 | 17/32 | 5/16 | 0.018 | ||||||
| 6-32 | UN-630142-1 | • | • | .135-.150 | 3/16 | 17/64 | 33/64 | 5/16 | 0.018 | |||||
| 6-32 | UN-630155-1 | • | • | .185-.195 | 5/32 | 9/32 | 19/32 | 5/16 | 0.018 | |||||
| 6-32 | UN-630013-1 | • | • | .045-.062 | 3/16 | 19/64 | 21/32 | 5/16 | 0.018 | |||||
| 6-32 | UN-630145-1 | • | • | .025-.040 | 3/16 | 15/32 | 13/16 | 5/16 | 0.018 | |||||
| 6-32 | UN-630119-1 | • | • | .025-.040 | 3/16 | 15/32 | 13/16 | 5/16 | 0.018 | |||||
| 6-32 | UN-630116-1 | • | .025-.040 | 3/16 | 31/64 | 53/64 | 5/16 | 0.018 | ||||||
| 6A | UN-630500-1 | • | • | • | .072-.092 | 17/64 | 3/16 | 7/16 | 1/2 | 0.025 | ||||
| 6A | UN-630205-1 | • | • | • | .032-.040 | 1/4 | 7/32 | 29/64 | 1/2 | 0.025 | ||||
| 6A | UN-630210-1 | • | • | • | .045-.062 | 3/16 | 7/32 | 15/32 | 1/2 | 0.028 | ||||
| 6A,B | UN-630273-1 | • | • | • | .025-.040 | 3/16 | 7/32 | 31/64 | 1/2 | 0.025 | ||||
| 6A,B | UN-630270-1 | • | • | • | .040-.026 | 3/16 | 7/32 | 15/32 | 1/2 | 0.025 | ||||
| 6A,B | UN-630501-1 | • | • | .025-.040 | 3/16 | 19/64 | 41/64 | 5/16 | 0.025 | |||||
| 6A,B | UN-630215-1 1 | • | • | • | • | .032-.064 | 7/32 | 5/16 | 17/32 | 1/2 | 0.025 | |||
| 6A,B | UN-630218-1 | • | • | .025-.040 | 3/16 | 15/32 | 13/16 | 5/16 | 0.025 | |||||
| 6A,B | UN-630217-1 | • | • | .025-.040 | 3/16 | 15/32 | 13/16 | 5/16 | 0.025 | |||||
| 6B | UN-630601-1 | • | • | .051-.064 | 17/64 | 3/16 | 15/32 | 1/2 | 0.025 | |||||
| 6B | UN-630730-1 | • | • | • | .051-.064 | 17/64 | 3/16 | 15/32 | 1/2 | 0.025 | ||||
| 8-32 | UN-631010-1 | • | • | .051-.064 | 17/64 | 3/16 | 15/32 | 1/2 | 0.025 | |||||
| 8-32 | UN-630995-1 | • | • | .014-.020 | 7/32 | 3/16 | 3/8 | 5/16 | 0.018 | |||||
| 8-32 | UN-631001-1 | • | • | .025-.051 | 7/32 | 3/16 | 3/8 | 5/16 | 0.018 | |||||
| 8-32 | UN-631005-1 | • | • | • | .072-.081 | 17/64 | 3/16 | 7/16 | 1/2 | 0.018 | ||||
| 8-32 | UN-631017-1 | • | .031-.051 | 7/32 | 1/4 | 17/32 | 7/16 | 0.018 | ||||||
| 8-32 | UN-631002-1 | • | • | • | .030-.065 | 13/64 | 13/64 | 33/64 | 1/2 | 0.018 | ||||
| 8-32 | UN-631015-1 | • | • | • | .010-.040 | 1/4 | 7/32 | 29/64 | 1/2 | 0.018 | ||||
| 8-32 | UN-631073-1 | • | • | • | .025-.040 | 7/32 | 15/64 | 17/32 | 1/2 | 0.018 | ||||
| 8-32 | UN-630997-1 | • | • | • | .025-.040 | 7/32 | 15/64 | 17/32 | 1/2 | 0.025 | ||||
| 8-32 | UN-631016-1 | • | • | • | .017-.040 | 7/32 | 15/64 | 33/64 | 1/2 | 0.018 | ||||
| 8-32 | UN-631071-1 | • | • | • | .045-.062 | 7/32 | 15/64 | 17/32 | 1/2 | 0.018 | ||||
| 8-32 | UN-630998-1 | • | .050-.066 | 7/32 | 17/64 | 35/64 | 5/16 | 0.018 | ||||||
| 8-32 | UN-631020-1 3 | • | • | • | • | .088-.098 | 7/32 | 5/16 | 43/64 | 13/32 | 0.018 | |||
| 6-32 | UN-631011-1 | • | • | .045-.062 | 7/32 | 21/64 | 43/64 | 13/32 | 0.018 | |||||
| 8-32 | UN-631055-1 | • | • | .100-.125 | 9/32 | 7/16 | 53/64 | 7/16 | 0.02 | |||||
| 8-32 | UN-631003-1 3 | • | • | .037-.094 | 15/64 | 15/32 | 49/64 | 1/2 | 0.018 | |||||
| 8-32 | UN-631012-1 | • | • | .045-.062 | 7/32 | 33/64 | 7/8 | 13/32 | 0.018 | |||||
| 8-32 | UN-631062-1 | • | • | .025-.040 | 7/32 | 33/64 | 7/8 | 13/32 | 0.018 |
Notes: 1. Turned up corner(s) on top leg, 2. Wide range panel., 3. Square fold., 4. Prevailing torque., 5. Up-turned barb on lower leg., 6. Full extrusion lower leg., 7. Special; request blueprint.
| SCREW SIZE |
WCL PRODUCT NUMBER |
A | B | C | D | E | F | G | H | I | PANEL THICKNESS RANGE |
PANEL HOLE DIAMETER MINIMUM |
HOLE CENTER TO EDGE |
UPPER LEG LENGTH |
WIDTH | METAL THICKNESS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8A,B | UN-631110-1 3 | • | • | .090-.098 | 7/32 | 5/32 | 23/64 | 5/16 | 0.025 | |||||||
| 8A,B | UN-631120-1 | • | • | • | .040-.050 | 7/32 | 5/32 | 29/64 | 1/2 | 0.028 | ||||||
| 8A,B | UN-632021-1 3 | • | • | • | .072-.092 | 17/64 | 3/16 | 7/16 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631625-1 | • | • | • | .072-.081 | 17/64 | 3/16 | 29/64 | 1/2 | 0.025 | ||||||
| 8A,B | UN-631975-1 | • | • | • | .025-.040 | 7/32 | 3/16 | 33/64 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631974-1 5 | • | • | • | • | .025-.040 | 7/32 | 3/16 | 33/64 | 1/2 | 0.028 | |||||
| 8A,B | UN-631335-1 | • | • | • | .045-.062 | 9/32 | 3/16 | 33/64 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631691-1 | • | • | • | • | .115-.130 | 3/16 | 3/16 | 21/32 | 5/8 | 0.028 | |||||
| 8A,B | UN-632020-1 | • | • | • | • | .030-.045 | 11/64 | 7/32 | 7/16 | 1/2 | 0.028 | |||||
| 8A,B | UN-632060-1 | • | • | • | .030-.040 | 1/4 | 7/32 | 15/32 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631100-1 3 | • | • | • | .035-.050 | 17/64 | 7/32 | 29/64 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631099-1 | • | • | • | • | .028-.040 | 17/64 | 7/32 | 15/32 | 1/2 | 0.02 | |||||
| 8A,B | UN-637801-1 | • | • | • | • | .035-.045 | 1/4 | 7/32 | 17/32 | 1/2 | 0.028 | |||||
| 8A,B | UN-631972-1 | • | • | • | .045-.062 | 7/32 | 15/64 | 17/32 | 1/2 | 0.028 | ||||||
| 8A,B | UN-637802-1 | • | • | • | • | .060-.070 | 1/4 | 15/64 | 33/64 | 1/2 | 0.028 | |||||
| 8A,B | UN-631976-1 | • | .115-.140 | 13/64 | 15/64 | 5/8 | 7/16 | 0.025 | ||||||||
| 8A,B | UN-632018-1 | • | • | • | .017-.031 | 9/32 | 1/4 | 7/16 | 1/2 | 0.028 | ||||||
| 8A,B | UN-632019-1 | • | • | .020-.060 | 9/32 | 1/4 | 7/16 | 1/2 | 0.028 | |||||||
| 8A,B | UN-632015-1 | • | • | • | .032-.050 | 9/32 | 1/4 | 29/64 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631600-1 | • | • | .057-.062 | 1/4 | 1/4 | 33/64 | 5/16 | 0.025 | |||||||
| 8A,B | UN-631605-1 1 | • | .057-.062 | 13/64 | 1/4 | 33/64 | 5/16 | 0.025 | ||||||||
| 8A,B | UN-631986-1 5 | • | • | • | • | .070-.090 | 17/64 | 1/4 | 39/64 | 7/16 | 0.028 | |||||
| 8A,B | UN-631402-1 | • | • | .025-.055 | 1/4 | 1/4 | 5/8 | 7/16 | 0.025 | |||||||
| 8A,B | UN-632025-1 5 | • | • | • | .035-.045 | 3/16 | 17/64 | 15/32 | 1/2 | 0.028 | ||||||
| 8A,B | UN-631977-1 3 | • | • | .062-.140 | 3/16 | 9/32 | 5/8 | 7/16 | 0.025 | |||||||
| 8A,B | UN-631360-1 | • | • | .062-.140 | 7/32 | 9/32 | 41/64 | 7/16 | 0.025 | |||||||
| 8A,B | UN-631337-1 | • | • | .045-.062 | 9/32 | 9/32 | 43/64 | 13/32 | 0.028 | |||||||
| 8A,B | UN-631514-1 3 | • | • | .050-.090 | 1/4 | 19/64 | 19/32 | 7/16 | 0.028 | |||||||
| 8A,B | UN-631401-1 3 | • | • | .037-.075 | 1/4 | 19/64 | 5/8 | 7/16 | 0.028 | |||||||
| 8A,B | UN-632385-1 3,4 | • | • | .180-.220 | 1/4 | 19/64 | 21/32 | 7/16 | 0.028 | |||||||
| 8A,B | UN-631354-1 | • | • | .040-.055 | 1/4 | 19/64 | 41/64 | 7/16 | 0.028 | |||||||
| 8A,B | UN-631500-1 3 | • | • | • | • | .037-.081 | 3/16 | 5/16 | 5/8 | 9/16 | 0.02 | |||||
| 8A,B | UN-631981-1 4 | • | • | • | .032-.038 | 9/32 | 5/16 | 11/16 | 13/32 | 0.028 | ||||||
| 8A,B | UN-632023-1 5 | • | • | • | • | • | .025-.040 | 7/32 | 21/64 | 19/32 | 3/8 | 0.025 | ||||
| 8A,B | UN-631980-1 | • | • | .040-.050 | 7/32 | 21/64 | 11/16 | 5/16 | 0.028 | |||||||
| 8A,B | UN-631983-1 | • | • | .025-.040 | 7/32 | 21/64 | 11/16 | 13/32 | 0.028 | |||||||
| 8A,B | UN-631984-1 3 | • | • | • | .015-.090 | 11/64 | 21/64 | 47/64 | 7/16 | 0.025 | ||||||
| 8A,B | UN-631532-1 | • | • | .055-.080 | 9/32 | 13/32 | 23/32 | 7/16 | 0.028 | |||||||
| 8A,B | UN-631979-1 | • | • | • | .102-.125 | 9/32 | 13/32 | 11/16 | 5/8 | 0.028 | ||||||
| 8A,B | UN-631978-1 3 | • | • | • | .030-.125 | 9/32 | 13/32 | 45/64 | 5/8 | 0.028 | ||||||
| 8A,B | UN-632390-1 | • | • | • | .064-.093 | 9/32 | 7/16 | 45/64 | 5/8 | 0.028 | ||||||
| 8A,B | UN-631400-1 | • | • | .025-.075 | 7/32 | 15/32 | 7/8 | 13/32 | 0.028 | |||||||
| 8A,B | UN-632397-1 | • | • | .025-.064 | 9/32 | 1/2 | 53/64 | 7/16 | 0.028 | |||||||
| 8A,B | UN-631160-1 | • | • | .025-.040 | 7/32 | 33/64 | 55/64 | 13/32 | 0.028 | |||||||
| 8A,B | UN-631161-1 | • | • | .045-.062 | 7/32 | 33/64 | 55/64 | 13/32 | 0.028 | |||||||
| 8A,B | UN-637820-1 3,7 | • | • | • | .170-.187 | 7/32 | 35/64 | 7/8 | 5/8 | 0.03 | ||||||
| 8A,B | UN-632399-1 3 | • | .156-.187 | 9/32 | 3/4 | 1-1/8 | 7/16 | 0.028 | ||||||||
| 8A,B | UN-631115-1 | • | .062-.094 | 9/32 | 53/64 | 11695 | 7/16 | 0.028 | ||||||||
| 10-24 | UN-632610-1 | • | • | • | .036-.050 | 9/32 | 1/4 | 29/64 | 1/2 | 0.02 | ||||||
| 10-24 | UN-632449-1 1 | • | • | • | • | • | .025-.032 | 9/32 | 1/4 | 1/2 | 1/2 | 0.02 | ||||
| 10-24 | UN-632450-1 1 | • | • | • | • | .025-.032 | 9/32 | 1/4 | 1/2 | 1/2 | 0.02 | |||||
| 10-24 | UN-632460-1 | • | • | • | .025-.040 | 1/4 | 1/4 | 37/64 | 5/8 | 0.02 | ||||||
| 10-24 | UN-632470-1 | • | • | .115-.130 | 7/32 | 1/4 | 5/8 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632540-1 | • | • | .025-.094 | 7/32 | 5/16 | 5/8 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632542-1 | • | • | .025-.094 | 1/4 | 5/16 | 5/8 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632501-1 | • | • | .025-.062 | 7/32 | 5/16 | 21/32 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632500-1 | • | • | • | .025-.062 | 7/32 | 5/16 | 41/64 | 7/16 | 0.02 |
Notes: 1. Turned up corner(s) on top leg, 2. Wide range panel., 3. Square fold., 4. Prevailing torque., 5. Up-turned barb on lower leg., 6. Full extrusion lower leg., 7. Special; request blueprint.
| SCREW SIZE |
WCL PRODUCT NUMBER |
A | B | C | D | E | F | G | H | PANEL THICKNESS RANGE |
PANEL HOLE DIAMETER MINIMUM |
HOLE CENTER TO EDGE |
UPPER LEG LENGTH |
WIDTH | METAL THICKNESS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10-24 | UN-632510-1 | • | • | .025-.080 | 5/16 | 5/16 | 5/8 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632511-1 | • | .025-.080 | 5/16 | 5/16 | 41/64 | 7/16 | 0.02 | |||||||
| 10-24 | UN-632505-1 6 | • | • | .025-.062 | 5/16 | 5/16 | 41/64 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632506-1 6 | • | • | .025-.081 | 5/16 | 5/16 | 21/32 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632625-1 | • | • | .045-.062 | 1/4 | 23/64 | 3/4 | 3/8 | 0.02 | ||||||
| 10-24 | UN-632465-1 | • | • | .050-.078 | 9/32 | 7/16 | 23/32 | 5/8 | 0.025 | ||||||
| 10-24 | UN-632750-1 | • | • | .093-.125 | 7/32 | 7/16 | 13/16 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632516-1 | • | • | .025-.064 | 9/32 | 1/2 | 27/32 | 7/16 | 0.02 | ||||||
| 10-24 | UN-632512-1 | • | • | • | .025-.064 | 9/32 | 1/2 | 27/32 | 7/16 | 0.02 | |||||
| 10-24 | UN-632581-1 | • | • | .025-.040 | 1/4 | 9/16 | 61/64 | 3/8 | 0.022 | ||||||
| 10-24 | UN-632580-1 | • | • | .045-.062 | 1/4 | 9/16 | 61/64 | 3/8 | 0.02 | ||||||
| 10-24 | UN-632700-1 | • | .156-.187 | 9/32 | 3/4 | 1-1/8 | 7/16 | 0.02 | |||||||
| 10-32 | UN-632760-1 | • | • | • | .055-.065 | 7/32 | 15/64 | 7/16 | 1/2 | 0.02 | |||||
| 10-32 | UN-632805-1 | • | • | .062-.094 | 7/32 | 19/64 | 5/8 | 7/16 | 0.018 | ||||||
| 10-32 | UN-632765-1 | • | • | .025-.064 | 7/32 | 1/2 | 27/32 | 7/16 | 0.018 | ||||||
| 10A | UN-633299-1 | • | • | .051-.064 | 9/32 | 7/32 | 15/32 | 1/2 | 0.03 | ||||||
| 10A | UN-633300-1 | • | • | • | .051-.064 | 9/32 | 15/64 | 15/32 | 1/2 | 0.03 | |||||
| 10A | UN-633177-1 | • | • | • | .023-.050 | 9/32 | 1/4 | 15/32 | 1/2 | 0.03 | |||||
| 10A | UN-632461-1 | • | • | • | .025-.040 | 1/4 | 1/4 | 9/16 | 5/8 | 0.03 | |||||
| 10A | UN-633271-1 | • | • | • | .045-.062 | 1/4 | 1/4 | 9/16 | 5/8 | 0.022 | |||||
| 10A | UN-633270-1 | • | • | • | .045-.062 | 1/4 | 1/4 | 9/16 | 5/8 | 0.03 | |||||
| 10A | UN-633206-1 6 | • | • | • | .025-.081 | 5/16 | 9/32 | 5/8 | 7/16 | 0.028 | |||||
| 10A | UN-633207-1 | • | • | .030-.081 | 1/4 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10A | UN-633100-1 3 | • | • | .081-.094 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10A | UN-633216-1 | • | • | • | .037-.064 | 7/32 | 19/64 | 37/64 | 7/16 | 0.03 | |||||
| 10A | UN-633217-1 3,4 | • | • | .180-.220 | 1/4 | 19/64 | 5/8 | 7/16 | 0.035 | ||||||
| 10A | UN-633201-1 | • | .037-.064 | 9/32 | 19/64 | 41/64 | 7/16 | 0.03 | |||||||
| 10A | UN-633190-1 | • | • | • | • | • | .040-.050 | 7/32 | 21/64 | 19/32 | 5/8 | 0.03 | |||
| 10A | UN-633209-1 | • | • | • | .025-.064 | 7/32 | 11/32 | 23/32 | 1/2 | 0.03 | |||||
| 10A | UN-633200-1 | • | • | .025-.062 | 1/4 | 23/64 | 3/4 | 1/2 | 0.03 | ||||||
| 10A | UN-633220-1 6 | • | • | .093-.109 | 9/32 | 13/32 | 11/16 | 5/8 | 0.028 | ||||||
| 10A | UN-633290-1 | • | • | • | .102-.125 | 9/32 | 13/32 | 45/64 | 5/8 | 0.03 | |||||
| 10A | UN-633471-1 | • | • | • | • | .102-.125 | 7/32 | 13/32 | 11/16 | 5/8 | 0.03 | ||||
| 10A | UN-633203-1 | • | • | • | • | .064-.093 | 9/32 | 7/16 | 11/16 | 5/8 | 0.03 | ||||
| 10A | UN-633170-1 | • | • | • | .020-.051 | 9/32 | 29/64 | 45/64 | 5/8 | 0.03 | |||||
| 10A | UN-633210-1 | • | • | .025-.064 | 9/32 | 1/2 | 53/64 | 7/16 | 0.03 | ||||||
| 10A | UN-633208-1 | • | • | .025-.062 | 1/4 | 33/64 | 61/64 | 1/2 | 0.03 | ||||||
| 10A | UN-633185-1 | • | • | .025-.040 | 1/4 | 33/64 | 61/64 | 1/2 | 0.03 | ||||||
| 10A | UN-633230-1 3 | • | • | .120-.140 | 17/64 | 17/32 | 29/32 | 5/8 | 0.03 | ||||||
| 10A | UN-633583-1 | • | • | .025-.040 | 1/4 | 9/16 | 61/64 | 1/2 | 0.03 | ||||||
| 10A | UN-633582-1 | • | • | .045-.062 | 1/4 | 9/16 | 61/64 | 1/2 | 0.03 | ||||||
| 10A | UN-633125-1 | • | • | .040-.064 | 9/32 | 9/16 | 7/8 | 5/8 | 0.03 | ||||||
| 10A,B | UN-634740-1 | • | • | • | .034-.047 | 1/4 | 3/8 | 3/4 | 1/2 | 0.03 | |||||
| 10B | UN-633903-1 3 | • | • | • | • | .050-.070 | 7/32 | 3/16 | 27/64 | 1/2 | 0.03 | ||||
| 10B | UN-634000-1 | • | • | • | .036-.050 | 9/32 | 1/4 | 7/16 | 1/2 | 0.03 | |||||
| 10B | UN-634001-1 | • | • | • | .036-.060 | 9/32 | 1/4 | 7/16 | 1/2 | 0.03 | |||||
| 10B | UN-634401-1 3 | • | • | .030-.064 | 9/32 | 9/32 | 39/64 | 7/16 | 0.03 | ||||||
| 10B | UN-633809-1 | • | • | .109-.125 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10B | UN-633815-1 | • | • | .081-.094 | 9/32 | 9/32 | 5/8 | 7/16 | 0.03 | ||||||
| 10B | UN-634725-1 3 | • | .125-.160 | 9/32 | 9/32 | 41/64 | 7/16 | 0.03 | |||||||
| 10B | UN-634715-1 3 | • | • | • | .080-.100 | 9/32 | 5/16 | 19/32 | 5/8 | 0.03 | |||||
| 10B | UN-633820-1 | • | • | • | .032-.064 | 7/32 | 11/32 | 23/32 | 1/2 | 0.03 | |||||
| 10B | UN-634050-1 | • | • | .040-.094 | 7/32 | 11/32 | 47/64 | 7/16 | 0.03 | ||||||
| 10B | UN-633815-1 | • | • | • | .102-.125 | 9/32 | 13/32 | 45/64 | 5/8 | 0.03 | |||||
| 10B | UN-634718-1 3 | • | • | • | .064-.093 | 9/32 | 7/16 | 23/32 | 5/8 | 0.03 | |||||
| 10B | UN-634705-1 | • | .078-.094 | 9/32 | 9/16 | 63/64 | 1/2 | 0.028 | |||||||
| 10B | UN-633840-1 | • | .156-.187 | 9/32 | 3/4 | 23383 | 7/16 | 0.03 |
Notes: 1. Turned up corner(s) on top leg, 2. Wide range panel., 3. Square fold., 4. Prevailing torque., 5. Up-turned barb on lower leg., 6. Full extrusion lower leg., 7. Special; request blueprint.
| SCREW SIZE |
WCL PRODUCT NUMBER |
A | B | C | D | E | F | PANEL THICKNESS RANGE |
PANEL HOLE DIAMETER MINIMUM |
HOLE CENTER TO EDGE |
UPPER LEG LENGTH |
WIDTH | METAL THICKNESS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12-24 | UN-635625-1 | • | • | .070-.080 | 5/16 | 11/32 | 5/8 | 5/8 | 0.022 | ||||
| 12A | UN-635505-1 | • | • | • | .043-.060 | 5/16 | 21/64 | 5/8 | 5/8 | 0.028 | |||
| 12A | UN-635502-1 | • | • | • | .043-.060 | 5/16 | 11/32 | 5/8 | 5/8 | 0.028 | |||
| 7309 | UN-637000-1 3 | • | • | • | .180-.190 | 9/32 | 5/16 | 5/8 | 11/16 | 0.025 | |||
| 7309 | UN-635635-1 | • | .051-.109 | 23/64 | 5/16 | 25/32 | 1/2 | 0.025 | |||||
| 7309 | UN-635610-1 3,6 | • | .051-.109 | 11/32 | 5/16 | 51/64 | 1/2 | 0.025 | |||||
| 7309 | UN-635585-1 | • | • | .051-.109 | 23/64 | 5/16 | 13/16 | 1/2 | 0.025 | ||||
| 7309 | UN-635590-1 3 | • | .310-.328 | 5/16 | 5/16 | 27/32 | 1/2 | 0.025 | |||||
| 7309 | UN-635605-1 | • | .093-.125 | 3/8 | 7/16 | 57/64 | 1/2 | 0.025 | |||||
| 7309 | UN-635615-1 3 | • | • | .035-.150 | 9/32 | 1/2 | 29/32 | 1/2 | 0.025 | ||||
| 7309 | UN-635602-1 | • | • | .035-.125 | 9/32 | 1/2 | 15/16 | 1/2 | 0.025 | ||||
| 7309 | UN-635600-1 3 | • | .064-.125 | 11/32 | 1/2 | 63/64 | 1/2 | 0.025 | |||||
| 7309 | UN-635583-1 1 | • | • | .025-.080 | 5/16 | 23/32 | 1-1/6 | 35/64 | 0.025 | ||||
| 7309 | UN-635584-1 1 | • | .070-.140 | 5/16 | 23/32 | 23381 | 9/16 | 0.025 | |||||
| 7309 | UN-635620-1 | • | • | • | • | .032-.156 | 9/32 | 15/16 | 1-1/4 | 5/8 | 0.025 | ||
| 7309 | UN-635630-1 | • | • | • | .060-.156 | 11/32 | 15/16 | 1-1/4 | 5/8 | 0.025 | |||
| 14A | UN-635510-1 | • | .032-.095 | 23/64 | 5/16 | 25/32 | 1/2 | 0.03 | |||||
| 14A | UN-635509-1 | • | .032-.051 | 23/64 | 3/8 | 13/16 | 1/2 | 0.035 | |||||
| 14A | UN-635545-1 | • | • | .062-.125 | 9/32 | 1/2 | 31/32 | 1/2 | 0.035 | ||||
| 14A | UN-635548-1 3 | • | • | .090-.140 | 3/8 | 11/16 | 1-1/4 | 5/8 | 0.035 | ||||
| 1/4B | UN-635570-1 | • | .051-.109 | 23/64 | 5/16 | 25/32 | 1/2 | 0.03 | |||||
| 1/4B | UN-635571-1 | • | .051-.109 | 23/64 | 5/16 | 25/32 | 1/2 | 0.04 | |||||
| 1/4B | UN-635010-1 3,4 | • | • | .095-.125 | 9/32 | 5/16 | 13/16 | 1/2 | 0.04 | ||||
| 1/4B | UN-635513-1 | • | .035-.065 | 11/32 | 1/2 | 31/32 | 1/2 | 0.025 | |||||
| 1/4B | UN-635511-1 | • | • | .062-.125 | 9/32 | 1/2 | 31/32 | 1/2 | 0.035 | ||||
| 1/4B | UN-635512-1 | • | .064-.125 | 11/32 | 1/2 | 31/32 | 1/2 | 0.035 | |||||
| 1/4B | UN-635573-1 1,3 | • | • | • | • | .050-.070 | 23/64 | 15/16 | 11697 | 3/4 | 0.04 | ||
| 1/4B | UN-635572-1 3,7 | • | • | • | • | • | .062-.125 | 9/32 | 15/16 | 11697 | 3/4 | 0.04 | |
| 6711 | UN-637914-1 1,3 | • | • | .075-.100 | 3/8 | 9/16 | 23379 | 5/8 | 0.028 | ||||
| 6711 | UN-637916-1 3 | • | .112-.140 | 3/8 | 9/16 | 23379 | 5/8 | 0.028 | |||||
| 6711 | UN-637920-1 1 | • | • | .039-.045 | 3/8 | 9/16 | 5845 | 5/8 | 0.028 |
Notes: 1. Turned up corner(s) on top leg, 2. Wide range panel., 3. Square fold., 4. Prevailing torque., 5. Up-turned barb on lower leg., 6. Full extrusion lower leg., 7. Special; request blueprint.