sw111Standard Internal Tooth Springrip™ Retainers

Internal tooth retainers slip easily over unthreaded shafts, rods and studs. The internal teeth flex as the retainer is pushed on, engaging the full circumference of the shaft, and setting up a strut action that strongly resists any back-off force. Slightly longer pilot teeth on the standard style are present on all but the smallest diameter parts, and are positioned to guide and center the retainer as it is pushed on the shaft.

SHAFT
SIZE
DESIGN
+/- .002		 WCL
PART
NUMBER		 INSIDE
DIAMETER
B Min.		 INSIDE
DIAMETER
B Max.		 OUTSIDE
DIAMETER
A
NOM.		 MATERIAL
THICKNESS		 NO. OF GRIP TEETH NO.
OF
PILOT
TEETH		 APPROX.
APPLICATION
FORCE
(LBS.)		 APPROX. REMOVAL FORCE (LBS.)
0.094 8064-09-00 0.085 0.088 0.394 0.01 4 – 15 90
0.156 8064-15-00 0.146 0.15 0.394 0.01 3 3 10 140
0.187 8064-18-00 0.177 0.181 0.394 0.015 3 3 15 170
0.25 8064-25-00 0.234 0.239 0.462 0.015 3 3 20 220
0.312 8064-31-00 0.288 0.292 0.598 0.015 6 3 20 400
0.375 8064-37-00 0.35 0.355 0.68 0.015 6 3 20 450
0.5 8064-50-00 0.483 0.49 0.776 0.017 6 3 25 520

Note: Due to shaft design and material variations,we suggest that you request testing samples prior to placing orders

Internal Tooth Retainers Style A

The Style A retainer has somewhat wider, but fewer, internal projections, or teeth, but functions much as the Springrip™ retainer in terms of on-to-off force rations.

SHAFT SIZE
DESIGN
+/- .002		 WCL
PART
NUMBER		 INSIDE
DIAMETER B MIN.		 INSIDE
DIAMETER B MAX.		 OUTSIDE
DIAMETER
A NOM.		 MATERIAL
THICKNESS
0.125 R-041210-1 0.113 0.118 0.265 0.01
0.145 R-041415-1 0.133 0.14 0.273 0.015
0.156 R-061512-1 0.147 0.152 0.356 0.012
0.175 R-051710-1 0.163 0.168 0.333 0.01
0.187 R-051810-1 0.173 0.178 0.333 0.01
0.187 R-051810-2 0.178 0.183 0.333 0.01
0.205 R-052010-1 0.194 0.198 0.333 0.01
0.238 R-072315-1 0.228 0.236 0.46 0.015
0.238 R-082315-1 0.228 0.236 0.475 0.015
0.25 R-082310-1 0.234 0.239 0.473 0.01
0.25 R-082525-1 0.235 0.24 0.472 0.025
0.25 R-082420-1 0.238 0.242 0.515 0.02
0.25 R-082410-1 0.239 0.244 0.472 0.01
0.265 R-082615-1 0.244 0.25 0.472 0.015
0.265 R-052406-2 0.244 0.25 0.389 0.006
0.276 R-102712-1 0.265 0.27 0.62 0.012
0.312 R-093020-1 0.298 0.302 0.54 0.02
0.312 R-083012-1 0.299 0.304 0.474 0.012
0.312 R-083015-1 0.295 0.305 0.51 0.015
0.324 R-113124-1 0.312 0.316 0.68 0.024
R-071232-1 Note 1 0.437 0.03
0.375 R-113615-1 0.36 0.365 0.685 0.015
0.403 R-103914-1 0.39 0.394 0.625 0.014
0.495 R-114815-1 0.478 0.484 0.687 0.015
Note 2 R-164716-1 0.485 0.49 1.028 0.016
0.625 R-186120-1 0.618 0.608 1.083 0.02
0.625 R-156115-1 0.61 0.614 0.951 0.015
0.64 R-146315-1 0.625 0.631 0.875 0.015
0.659 R-186520-1 0.647 0.657 1.083 0.02
0.675 R-216628-1 0.659 0.669 1.299 0.295
0.703 R-176813-1 0.681 0.689 1.082 0.013
Note 2 R-167515-1 0.76 0.74 1.015 0.015
0.8 R-227825-1 0.79 0.78 1.375 0.025
1.125 R-32J815-1 1.075 1.085 2 0.015
1.135 R24K215-1 1.12 1.125 1.573 0.015

Note: Due to shaft design and material variations,we suggest that you request testing samples prior to placing orders.
1. Irregular hole. Request print.
2. Internal and external teeth . Request print.

Intesw112rnal Tooth Retainers

Other Internal Tooth Springrip™ Retainers

SHAFT SIZE
DESIGN
+/- .002		 WCL
PART
NUMBER		 INSIDE DIAMETER B MIN. INSIDE DIAMETER B MAX. OUTSIDE
DIAMETER
A NOM.		 MATERIAL
THICKNESS
0.078 8063-08-00 0.068 0.073 0.22 0.01
0.094 8063-09-00 0.081 0.085 0.18 0.01
0.094 8063-09-03 0.081 0.086 0.265 0.01
0.087 8063-09-04 0.08 0.077 0.18 0.012
0.112 8063-11-00 0.102 0.107 0.258 0.01
0.12 8063-12-01 0.11 0.115 0.265 0.01
0.125 8063-12-00 0.113 0.118 0.265 0.01
0.135 8063-13-01 0.122 0.127 0.263 0.01
0.145 8063-14-00 0.133 0.14 0.281 0.015
0.156 8063-15-00 0.146 0.151 0.332 0.01
0.156 8063-15-04 0.146 0.151 0.332 0.012
0.162 8063-16-01* 0.152 0.157 0.332 0.01
0.162 8063-16-02 0.151 0.155 0.333 0.02
0.175 8063-17-02 0.164 0.166 0.332 0.01
0.181 8063-18-09 0.17 0.174 0.333 0.01
0.187 8063-18-10 0.173 0.178 0.332 0.01
0.218 8063-21-01 0.202 0.207 0.402 0.013
0.226 8063-22-00 0.215 0.22 0.472 0.015
0.25 8063-25-00 0.239 0.244 0.472 0.015
0.25 8063-25-03 0.24 0.235 0.477 0.025
0.25 8063-25-05* 0.239 0.244 0.734 0.02
0.25 8063-25-10* 0.239 0.244 0.625 0.02
0.265 8063-26-00 0.25 0.255 0.472 0.013
0.311 8065-31-00 0.295 0.301 0.626 0.02
0.312 8063-31-00 0.299 0.304 0.603 0.015
0.312 8063-31-07** 0.288 0.292 0.598 0.025
0.312 8063-31-08 0.304 0.299 0.473 0.012
0.33 8063-31-09 0.318 0.323 0.472 0.013
0.343 8063-34-01 0.328 0.333 0.687 0.01
0.375 8063-37-00 0.36 0.365 0.687 0.015
0.421 8063-43-14 0.39 0.394 0.781 0.012
0.421 8063-43-03* 0.4 0.41 0.781 0.017
0.437 8063-43-02* 0.427 0.432 0.781 0.01
0.437 8063-43-01 0.427 0.432 0.687 0.01
0.475 8063-47-01 0.467 0.462 0.781 0.017
0.5 8063-50-02 0.493 0.498 0.781 0.01
0.552 8063-55-01* 0.541 0.546 1 0.02
0.625 8063-62-00 0.61 0.615 0.968 0.02
0.625 8063-62-02 0.61 0.615 0.968 0.04
0.703 8063-70-00 0.686 0.693 1.25 0.029
0.75 8063-75-03 0.735 0.74 0.965 0.01
0.75 8063-75-01* 0.735 0.74 1.25 0.02
0.85 8063-85-00 0.835 0.84 1.192 0.025
1 8063-99-04* 0.97 0.98 1.375 0.015
1.062 8063-99-03 1.04 1.045 1.625 0.012

Note: Due to shaft design and material variations,we suggest that you request testing samples prior to placing orders.
* Part has flat outer rim.
** Part has combination of gripping and pilot teeth.